ACO Stand Alone RFID Reader, Flush Mounted

Calculated at Checkout


The reader enables simple addition of cards by means of the “Master” card (without connection to the computer) or advanced addition and management of cards by means of an appropriate computer software and a CDN-USB cable.

The INS-ACC is provided with a built-in display, which may show the ordinal numbers of cards, and signalises the activity of the output – opening of the door (information for the persons with hearing impairment). 

Also equipped with sound signalling (which may be switched off), also informing about the activity of the output – door opening (information for the people having failing eye-sight).

Panel Features

  • LED display
  • Displays transponder's serial number
  • Resistant to bad weather conditions and vandalism
  • Acoustic signal can be disabled
  • Operates up to 1536 cards
  • Two independent outputs
  • Adjustable acivity time of every output 1-9sec
  • Compatible with tranditional e-locks
  • Controls reverse e-lock
  • Compatible with reverse e-locks and magentic keepers (CDN-PK module essential)
  • Controls outside opening button (1 output)
  • Programmed via a Master card/fob or connect via you PC using the CDN-USB
  • Free and easy to use software available

Extra Information

ACO Door Entry Systems
2mm thick flat front panel
Panel Dimensions:
111 x 130mm
Back Box Dimensions:
110 x 90 x 31mm
Surface Back Box:
132.2 x 113.2 x (37.5/29)
Installation Panel Type:
2 wires for power, 2 wires for e-lock
Power Supply:
12V ± 0,5V AC , 260mA (the device only)
Stand-by Power Consumption:
Outputs: First and second output (screw terminals ARK) to connect:
Traditional e-lock (max. 1A) | Relay module CDN-PK (max. 5A)
Screw terminals ARK
Normally open contact for e.g. Door bell
Direct activation of the first e-lock: - power connection
Features for the Disabled:
Acoustic and optical signalisation of the device function