Self-Regulating Trace Heating Cable Kit, 20m Drum

Calculated at Checkout


The ideal solution for low power frost protection or temperature maintenance on metallic and non-metallic types, valves, roof gutters, drain pipes, pumps, water taps, small water tanks, and boiler condensate pipes etc.

  • Supplied in 20m drums (can be cut to any length)
    • NOTE: A termination kit is required for each run of trace heating cable 
  • Self-regulating - output automatically adjusts to suit the prevailing conditions, for the lower the ambient temperature the higher the output
  • Tough cable protection with tin-plated, copper braiding and a thermoplastic and outer sleeve
  • Moisture proof and UV resistant
  • Will not overheat or burn out even when overlapped 

Each Kit contains

  • 20m length trace heating cable
  • 1 termination kit
    • 6 x heat shrink sleeves (various)
    • 2 x wire pins (ferrules)
    • connection insulator
    • pin type cable socket
    • M25 cable gland

Technical Specification

  • Dimensions: 13.6 x 5.5mm
  • 230V, nominal output 10W/m @ 10°C ambient temperature
  • Max exposure temperate: 80°C (De-energise), 65°C (energised)
  • Min installation temperature: -45°C
  • Min bending radius: 25m
  • Max cable run: 144m @ 10°C (16A) power